CUWB PRODUCTS
DWUSB The Ciholas DWUSB-SMA is a demonstration device for experimenting with Ultra-Wideband (UWB) Real Time Location Systems (RTLS). In the Ciholas UWB (CUWB) system, the DWUSB can act in multiple roles, such as reference anchor, mobile trackable tag, and UWB network interface. The DWUSB-KIT comes with a DWUSB-SMA unit, removable antenna, USB rechargeable battery, AC/DC wall power adapter, and a USB cable. CHG100 The CHG100 Charger is an efficient and space saving product that allows simultaneous charging of multiple Ciholas Ultra-Wideband (CUWB) DWTAG100s. It supports charging of up to 10 units at a time. MHK100 The Ciholas DWETH Mount-Kit is a threaded downrod kit for DWETH101 and DWETH111. The kit provides a method for elevating the devices from a mounting surface. Mounting surfaces such as drop ceiling grids, metal studs, and rafters can interfere with UWB signals. Ciholas recommends that DWETHs be mounted 4-6” off of any surface. ANT110 The Ciholas ANT110 is a monopole antenna designed to operate from 3.2 GHz to 7 GHz. It is intended for use in Ultra-Wideband (UWB) applications and is provided in the DWUSB kit for use with the DWUSB-SMA. The antenna is small enough to allow implementation in portable devices and has a standard polarity SMA connector. DWETH111 A DWETH is an Ultra-Wideband (UWB) transceiver intended for use with the CUWB RTLS. In a typical CUWB RTLS the DWETH operates as a static, or anchored, device providing reference locations for the system. DWETH111 uses Ethernet to provide reliable, high-bandwidth data connectivity, and has a comprehensive set of on board sensors. DWETH111 anchors are Powered over Ethernet (PoE) and are PoE standard compliant. DWTAG100 A DWTAG100 is an Ultra-Wideband (UWB) transceiver intended for use with CUWB RTLS. In a typical CUWB RTLS system the DWTAG100 operates as a mobile device whose location is tracked. DWTAG100s have a comprehensive set of on-board sensors and an integrated rechargeable battery. The DWTAG100 is lightweight with a mechanical design that allows for easy mounting on assets or personnel. CPE100 The CPE100 is small form factor device that provides the ability to power multiple Chainable Powered Ethernet (CPE) devices from a single Power over Ethernet (PoE) switch or router port. The CPE100 is fully 802.3af/at compliant, and can be configured to classify as a PoE class 1, 2, 3 or 4 device. The CPE100 enables the utilization of existing PoE infrastructure to power multiple devices improving infrastructure efficiency and reducing installation costs. DWETH101 A DWETH is an Ultra-Wideband (UWB) transceiver intended for use with the CUWB RTLS. In a typical CUWB RTLS the DWETH operates as a static, or anchored, device providing reference locations for the system. DWETH101 uses Ethernet to provide reliable, high-bandwidth data connectivity, and has a comprehensive set of on board sensors. DWETH101 anchors contain a built-in Ethernet switch and support Chainable Powered Ethernet (CPE), allowing for a chain of devices to be powered via a single source.
